BeoLink and Masterlink Gateway drivers (Legacy)

NOTE: Only use these drivers when integrating with Bang & Olufsen legacy products that has the Master Link socket. For newer Network Link based products use the direct IP drivers.

These drivers are based on the open protocol called Master Link Gateway Protocol. It can be found in the downloads section of this page.

These drivers require a BeoLink Gateway or a Master Link Gateway in order to interface with the Bang & Olufsen products connected via Master Link (Bus cable). Both of these products are now marked obsolete.

Many of the Master Link TV’s are able to provide status feedback telegrams if enabled in the Customer Service Menu > ADJUSTMENTS > STAT. TO MLGW > ON. The Network Link products only support one-way communication, which means only command telegrams can be sent via the BeoLink Gateway/Master Link Gateway.

If commands and status feedback is required from the Network Link products, please utilize the Direct IP drivers.

Crestron (We currently have Crestron drivers for the 2 and 3 series.)